Things to keep in mind when using the safe

Four notes for daily maintenance

battery usage

Please use No. 5 AAA high-quality non-leakage alkaline batteries. Please pay attention to the positive and negative polarity of the battery when placing the battery, and place it according to the positive and negative polarity marks on the battery box. Do not take the battery out of the battery box for a long time.

Storage of product user manuals and accessories

Please keep the product user manual, door lock key, emergency key, electronic key, battery box, keyhole plastic rod, shopping invoice, warranty card and other accessories in a safe place.

The product number and password of the safe are recorded in the user manual. The factory establishes the technical file of the product according to the product number and product model. According to it, the user can retrieve the password of the safe, which is particularly important for mechanical safes. Be careful not to lock these accessories into the safe. If the safe cannot be opened, there will be no means of emergency opening.

If it is a safe with upper and lower double doors, it is recommended to mark the keys of the upper and lower doors, so as to avoid the failure of the key stuck in the lock cylinder and cannot be turned or pulled out after misuse. After the password is modified, it is best to record it in another book, so as not to forget it and bring the trouble of unlocking. The key and password must be kept separately, which is more secure.

Safe use environment

The safe is suitable for indoor use at room temperature. Use in a humid and corrosive gas environment, with strong sunlight and ultraviolet rays, will crack and discolor the paint on the surface of the safe, discoloration and aging of plastic parts, surface rust and oxidation, and unstable performance of electronic components. .

Safe maintenance

After the surface of the safe is stained, it cannot be scrubbed with chemical solvents, but can be scrubbed with a clean rag dipped in a little detergent. A little lubricating oil (home cooking oil is also acceptable) can be used to lubricate the protruding door bolt and the drawer's roller, and a little pencil lead powder (graphite) can be injected into the key lock cylinder, which can make the key insertion, removal and rotation easier.