Precautions and tips for using the safe

How to add an insurance to the safe

The safe is an anti-theft device. If we add our sense of responsibility and attention during use, the anti-theft coefficient of the safe will be greatly improved. Pay attention to the following points when using the safe:

1. When turning the mechanical code lock, you need to calmly turn it slowly, don't turn it vigorously, and remember the direction and number of times.

2. It is best to set the password when the safe door is open. After the password is set, you should enter the new password for several operations and confirm that it is correct before you can lock the door.

3. Do not lock the manual and emergency key into the safe.

4. When using the alarm, do not arbitrarily adjust the internal switches and electronic components. If the sound becomes smaller, it indicates that the battery is exhausted. Replace it in an emergency. If a false alarm occurs, the sensitivity can be appropriately lowered.

5. To ensure that the safe is securely fixed, the cone pin in the expansion nut must be hammered until the nut expands and swells tightly. The nut is sufficiently strong in the wall hole.

6. The safe must be fastened to the concrete wall.

7. When there is no external battery for a long time, the battery should be taken out of the battery box.



Installation and fixation before use

Safes and cabinets must be installed and fixed on the wall or other similar hard objects before use. This is essential for the safe use of safes and cabinets and the best possible anti-theft effect. The Almighty/Energy safes and cabinets have fixed installation holes on the back and bottom, and are equipped with expansion screws for fixing. Please install the fixed safes and cabinets according to the instructions in the product user manual. Suggestions for safer installation and fixation of safes and cabinets are as follows:

1. Before installing and fixing the safe and cabinet, remove the feet of the bottom of the safe box and the casters at the bottom of the safe, so that there is no gap at the bottom after the safe and cabinet are installed and fixed, which is more effective in preventing the safe and cabinet from being pried.

2. Safes and cabinets must be installed and fixed on the concrete wall, and it is best to be installed by professionals to ensure the strength and quality of the installation and fixation.

3. Choose a suitable and concealed location to install and fix the safe and cabinet. It is best to install and fix the left and back of the safe and cabinet against the wall at the same time, which has the best anti-prying and anti-theft effect. If you can make furniture cover outside the safes and cabinets, it will be better to protect the privacy and security of the safes and cabinets.