Safe purchase guide

1. Confirm the materials:
The steel materials used in the manufacture of anti-theft safes are 3 mm, 4.5 mm, 5 mm, 6 mm, 8 mm, etc., and it is safer to choose thick materials.
2. Confirm the structure:
The anti-theft safe must be provided with anti-drilling steel plates on the key parts of the door panel and the cabinet body. If the door frame and the cabinet body are integrally formed, the anti-theft performance will be better.
3. Confirm the lock:
The anti-theft safe must have a long and reliable service life, and the lock is very important. You should understand it clearly when you buy it.

1. First of all, from the difference in the outer packaging of the product, the safe products produced by regular manufacturers will clearly mark the product name on the product packaging, and will not deliberately obscure the concept and confuse the product. Such as: T-shaped storage cabinets, boutique storage cabinets, electronic password safes, mechanical safes, etc. From these names, it is possible to correctly distinguish between safes and treasure cabinets.
　　2. Open the outer packaging and check whether the product itself has the CCC mark. If it is affixed with the CCC mark and it is not a forged CCC mark, it should be a safe in the true sense. One of the issues involved here is how to correctly identify the CCC mark.
　　3. Carefully check the appearance of the product, from the workmanship, check the appearance of the product, the degree of joint of the door seam, whether the box body is polished smoothly, the opening of the lock, and the safety performance, etc.
4. Open the product and distinguish it from the thickness of the steel plate, especially the thickness of the door panel. For safe products with better quality, the thickness of the steel plate of the door panel is not less than 10mm, and it is composed of a single steel plate, and I want to compare it For products with poor quality, the thickness of the steel plate is very thin, and it may be composed of two steel plates.
　　5. Check the box carefully to see how well the steel plates are connected on the four sides. The box of a good safe is formed by stamping steel plates at one time. There are almost no gaps on the four sides, and it has very good anti-stealing performance. At the same time, tap the box lightly and listen to the sound. The box of a good safe is entirely composed of steel plates, and it will have a crisp sound when tapped. Some products are made of two thin iron sheets inside and outside. Composition, filled with sand in the middle, this kind of box will make a dull sound when knocked.

　　 6. The purchase of anti-theft safe
　　 Most of the anti-theft safes on the market are of the A1 category. There are various shapes and styles of products. Consumers can choose according to their needs. No matter what style of anti-theft safe products they choose, consumers should pay attention to the following aspects:
　　① The color of the paint film (or spray film) on the exterior surface of the anti-theft safe should be uniform, and there should be no obvious defects such as cracks, gas gowns, spots, etc.
　　②For anti-theft safes with cabinet height ≤ 600 mm, the upper, right and left clearance between the door and the door frame is ≤ 1.5 mm, and the lower clearance is ≤ 2 mm. If the gap is too large, the anti-theft performance will be reduced.
　　③ When the weight of Class A and Class B anti-theft safes is less than 340 kg, there should be installation fixing holes, fixing parts and instructions for fixing, and they should be fixed in time according to the requirements of the manual.
　　④Anti-theft safes generally have a door thickness of 8 mm to 10 mm, and a cabinet thickness of 6 mm or more, so that the anti-theft performance can be guaranteed. When purchasing, you should ask the store for the thickness of the steel plate.