Identify the qualified technical data of the anti-theft safe

At present, the anti-theft safes on the market have various shapes and styles. Consumers can choose according to their needs. No matter which style of anti-theft safe products they choose, consumers should pay attention to the following aspects:
1. The color of the paint film (or spray film) on the outer surface of the anti-theft safe box should be uniform, and there should be no obvious defects such as cracks, gas gowns, and spots.
2. The electronic anti-theft box should be equipped with at least one electronic anti-theft lock, but no magnetic card lock is allowed.
3. When using carbon structural steel plate to make the box (and door leaf), the tensile strength of the steel plate is not less than 345Mpa. The thickness of the steel plate: Grade A is not less than 6mm; Grade B is not less than 8mm. When using low-alloy high-strength structural steel plates to make the box (and door leaf), the thickness of the steel plate: Grade A is not less than 4mm; Grade B is not less than 6mm.
4. The opening angle of the safe door is not less than 90 degrees. The maximum gap between the door leaf and the door frame is not more than 2mm. The flatness of the upper surface and the two side surfaces of the box body is not more than 2.5mm, and the flatness of the door leaf surface is not more than 1.5mm.
5. The electronic code lock can be changed arbitrarily, can use multiple codes and multi-level management, input the wrong code 3 times, automatically lock or alarm.



Consumers can refer to the above technical data to inquire and compare with the store when purchasing, to further identify whether the quality of the product is qualified.