Common sense in using safes

The safe is an anti-theft device. If our sense of responsibility and attention is added to the use process, the anti-theft coefficient of the safe will be greatly improved.

The following points should be noted when using the safe:

1. When turning the mechanical combination lock, it is necessary to turn it slowly and calmly, and do not turn it violently. At the same time, remember the direction and number of times. If it accidentally exceeds the marking line, it cannot be reversed and must be restarted.

2. It is best to set the password when the safe door is open. After the password is set, you should enter the new password and operate several times. After confirming that it is correct, the cabinet door can be locked.

3. Do not lock the manual and emergency key into the safe.

4. When the alarm is in use, do not mobilize the internal switches and electronic components at will. If the sound becomes smaller, it indicates that the battery is used up and should be replaced in an emergency. If a false alarm occurs, the sensitivity can be appropriately lowered.

5. In order to ensure the reliable fixation of the safe, the cone pin core in the expansion nut must be hammered until the nut expands and tightens. The nut is sufficiently strong in the wall hole.

6. The safe must be fastened to the concrete wall.

7. When the external battery is used for a long time, the battery should be taken out from the battery box.